- Katılım
- 11 Ocak 2013
- Mesajlar
- 3,614
- Tepkime puanı
- 3,131
- Yaş
- 59
- Konum
- istanbul/çekmeköy
- İlgi Alanı
- Uçak
Helidirect'en mesaj geldi ön sipariş ile satmaya başlamışlar.
kitin tam ismi
HD 500 DBDS CELL
Recommendations
General SpecificationsRecommended Components:
Cyclic servos: BK Servo BKMS01, MKS DS9670A, Savöx SH-1250mg digital
Tail servo standard or mini: BK Servo BKMS02, MKS DS 760 digital or Savöx SH-1290MG
Motor: Scorpion HK4015-1070 kV, HK3226-900 kV or Scorpion HK4020-1100 kV V3
FBL Electronics: iKON, Skookum SK540, Microbeast X
Regulator: Kontronik Jive 100-LV, Phoenix Ice 75
Blades: SAB 500 mm FBL, SpinBlades 465-500 mm FBL
Technical data HD 500 CELL DBDS
500 class optimized for 6s operation
Main blades: 465 - 500mm
Rotor diameter with 465mm main blades: 1065mm
New Direct Belt Drive System with a 18mm belt and light weight aluminium wheels for smooth and silent operation
Take-Off weight ca. 1700 Gramm without batteries
Length: Ca. 970mm
Width: Ca. 140mm
Height: Ca. 295mm
Tail rotor: 220mm
Main rotor: Ø 10mm
Tail shaft: : Ø 4 mm
Main drive gear: 120T
Optional pinion 15T / 16T / 17T / 18T
Drive gear ratio: 120T / 126 - 1 : 10 to 1:8,00
Tail gear ratio: 76T / 16T - 1 : 4,8
Integrated Tail Belt Tension System
Usage of 48,9mm engines possible
Battery mounted upside down for an optimized center of gravity
Contra engine bearing and 3 bearing for the main rotor shaft
kit 649 usd ben hayatta verip almam ama yeni haber babında paylaşayım dedim.
daha detaylı bilgi için:
kitin tam ismi
HD 500 DBDS CELL
Bu RESMİ görmek için izniniz yok. Giriş yap veya üye ol
Bu RESMİ görmek için izniniz yok. Giriş yap veya üye ol
Bu RESMİ görmek için izniniz yok. Giriş yap veya üye ol
Recommendations
General SpecificationsRecommended Components:
Cyclic servos: BK Servo BKMS01, MKS DS9670A, Savöx SH-1250mg digital
Tail servo standard or mini: BK Servo BKMS02, MKS DS 760 digital or Savöx SH-1290MG
Motor: Scorpion HK4015-1070 kV, HK3226-900 kV or Scorpion HK4020-1100 kV V3
FBL Electronics: iKON, Skookum SK540, Microbeast X
Regulator: Kontronik Jive 100-LV, Phoenix Ice 75
Blades: SAB 500 mm FBL, SpinBlades 465-500 mm FBL
Technical data HD 500 CELL DBDS
500 class optimized for 6s operation
Main blades: 465 - 500mm
Rotor diameter with 465mm main blades: 1065mm
New Direct Belt Drive System with a 18mm belt and light weight aluminium wheels for smooth and silent operation
Take-Off weight ca. 1700 Gramm without batteries
Length: Ca. 970mm
Width: Ca. 140mm
Height: Ca. 295mm
Tail rotor: 220mm
Main rotor: Ø 10mm
Tail shaft: : Ø 4 mm
Main drive gear: 120T
Optional pinion 15T / 16T / 17T / 18T
Drive gear ratio: 120T / 126 - 1 : 10 to 1:8,00
Tail gear ratio: 76T / 16T - 1 : 4,8
Integrated Tail Belt Tension System
Usage of 48,9mm engines possible
Battery mounted upside down for an optimized center of gravity
Contra engine bearing and 3 bearing for the main rotor shaft
kit 649 usd ben hayatta verip almam ama yeni haber babında paylaşayım dedim.
Bu VIDEOYU görmek için izniniz yok. Giriş yap veya üye ol
daha detaylı bilgi için:
Bu LİNKİ görmek için izniniz yok. Giriş yap veya üye ol
Bu VIDEOYU görmek için izniniz yok. Giriş yap veya üye ol