İbrahim DEMİRBİLEK' Alıntı:
Yanılmıyorsam 1.2.1 di Kağan
GT-I9300 cihazımdan Tapatalk kullanılarak gönderildi
1.3.1 de denemen mümkün mü? iyileştirmeler aşağıdaki gibi:
Version 1.3.0 was released!
It brings many new features and improvements:
Spirit Pro support!
New sensor data processing.
Improved flight behavior and precision.
Improved Governor:
Max. parameter range was extended (has to be reconfigured).
New feed forward algorithm for immediate response and superior performance.
Support for more sensors.
Spoolup rate can be configured with higher precision.
Governor is activated at 40%+ TC.
Governor can be enabled/disabled between banks (check settings between banks!).
Improved bailout feature.
Throttle settings are available for disabled governor too:
Frequency can be configured to obtain much better performance.
Throttle Range - Max. value can be configured to 150 for disabled governor.
Channel Mapping was improved to display current channel values.
Improved Wizard:
Saving of the settings is available anytime with CTRL+S.
Unit can be disconnected anytime during the process of setup.
BEC tester was improved to determine if the power supply is sufficient.
New bank comparison feature.
New bootloader.
New secure format for the firmware.
New firmware flash procedure:
Much more secure (encryption, data integrity verification).
Firmware can be flashed easily even when any kind of failure occured previously (with the new recovery mode).
Improved Rescue and Stabilisation mode:
Stabilisation hovering level can be manipulated to a higher extent.
Rescue (Normal) has 1.5s climb out as with Acro mode.
Improved precision with more level corrections.
Improved UDI protocol compatibility.
Support for next channel in PWM connection with Spirit Pro.
New Rudder end-points setup.
Additional features with Spirit Pro..